Description
Formulated and blended using only the highest quality polymers and fillers, the range of silicone rubber compounds offered by The Contenti Company covers the entire spectrum of centrifugal rubber mold casting applications.
Every silicone rubber mold set has a nominal thickness of 1″ and consists of four 1/4″ thick sections. The term “durometer” used below refers to the relative hardness of a rubber compound when cured. The higher the durometer, the harder the rubber compound is.
Product Details
| Rubber Series | Applications | Durometer | Flexibility | Tear Resistance | Temperature Resistance |
|---|---|---|---|---|---|
| Nicem White | A backing material for more expensive mold compounds. | 64-66 | Medium | Medium | Medium |
| 200 Series | Polyester and polyurethane resins, lead and tin alloys, and as a backing material for more expensive mold compounds. | 63 | Medium | Medium | Medium |
| 500 Series | Fishing lures, high lead content alloys and polyester and polyurethane resins. | 57 | Med-High | Medium | High |
| Nicem Green High Tear | Tin and lead alloy pieces with substantial undercuts. Often used for short runs in zinc alloys. | 55-57 | High | Very High | High |
| Nicem Yellow | Zinc, tin and lead alloys, polyester and polyurethane resins. | 59-62 | High | Med-High | Very High |
| Nicem Blue | Zinc, tin and lead alloys. Polyester and polyurethane. | 63-65 | Medium | Medium | Highest |
| Nicem Green Low Temperature Cure | Used when very low shrinkage is necessary or desirable. | 49-51 | Very High | Very High | Med-High |
Reviews
There are no reviews yet.