Description
The GRS C-Max Tapered Flat Carbide Graver has tapered sides and a flat tool bottom. The 1/8″ round shanks are perfectly sized to fit 1/8″ round GRS QC Tool Holders for GRS graver handles and power handpieces
| Item # |
|
No. |
Width |
Price |
Qty |
|
|
 |
36 |
0.2 mm (A) |
|
|
|
|
 |
37 |
0.4 mm (A) |
|
|
|
|
 |
38 |
0.6 mm (A) |
|
|
|
|
 |
39 |
0.8 mm (A) |
|
|
|
|
 |
40 |
1.0 mm (A) |
|
|
|
|
 |
41 |
1.2 mm (A) |
|
|
|
|
 |
42 |
1.4 mm (A) |
|
|
|
|
 |
43 |
1.6 mm (A) |
|
|
|
|
 |
44 |
1.8 mm (A) |
|
|
Graver Basics
Unless otherwise noted, all gravers come pre-shaped with a ground cutting face. Gravers must be sharpened before use. Sharpening can be done manually with a stone or automated with a motorized hone.
Flat Gravers have a flat cutting edge with either parallel or slightly tapered sides. They’re useful for removing or texturing backgrounds, bright-cutting, block lettering, and cutting consistent width lines for borders.
GRS C-Max GRS C-Max gravers are made from a specially formulated tungsten carbide alloy for a great blend of hardness and toughness. Although more brittle than other steel alloys, C-Max gravers stay sharp much longer.
GRS C-Max gravers can only be sharpened with diamond abrasives.
Reviews
There are no reviews yet.